Web Filtering and Privacy protection may prevent some images from displaying correctly.
On rare occasions, some Web page images may not disply correctly when both Web Filtering and Privacy Protection are enabled.
b. Dashboard flickers
When ZoneAlarm Pro is is run on a computer with a slow processor, the ZoneAlarm Pro dashboard may flicker.
c. VPN client error
When running ZoneAlarm Pro with a Cisco VPN client, you may receive the VPN
error message, "System Error: Unable to retrieve connection status." To avoid
this, add the client computer's loopback address to the Trusted Zone, and give
access permission and server permission to the VPN client. [7212]
d. Built in XP firewall prevents FTP.
The built-in XP firewall can interfere with ZoneAlarm Pro's handling of active FTP traffic. This may result in incoming FTP traffic being blocked by ZoneAlarm Pro. To solve this problem, either use passive FTP, or turn off the XP firewall. [8456]
e. Alerts not forwarded from ICS gateway to client
When "Forward alerts from gateway to this computer" option is selected under ICS setup, alerts are sometimes not displayed on the ISC client computer. [8462]
f. Mobile code settings not preserved during upgrade
When upgrading from ZoneAlarm Pro 3.0 or 3.1 to ZoneAlarm Pro 3.7, Mobile code settings (Block scripts, Blocke embedded objects, and Block MIME-type integrated objects) are sometimes not preserved. After upgrading, go to the Mobile Code tab to check your settings. [8385]
g. Log control settings not preserved on upgrade from 2.6
When upgrading from ZoneAlarm Pro 2.6 to ZoneAlarm Pro 3.7, log control settings are returned to defaults. [8689]
h.Single host computer networks automatically added to Internet Zone.
By design in ZoneAlarm Pro 3.7, detected networks with a subnet mask of 255.255.255.255 are automatically added to the Interet Zone without the intervention of a New Network alert or Network Configuration Wizard. These networks consist only of the host computer itself. Such network detections normally occur when connecting to an ISP, either via dial-up or DSL connection. [8512]
i.Privacy Protection affects banners in uploaded Web pages
If you use Microsoft Front Page or a similar program to upload Web pages to a Web site while Privacy Protection is enabled, you may find that banners in those pages do not display properly. To avoid this, turn off Privacy Protection before uploading Web pages. [8922]
j. Web Filtering Violation page doesn't display fully in small pop-ups
In rare instances, Web Filtering settings block the content of a pop-up window within a permitted. If that pop-up window is designed not to resize, the Web Filtering Violation page is not fully visible. There is no workaround for this issue. [8768]
k. Windows Media Player v. 9 requires server permission for RTSPU streaming media
In order to receive streaming video via the RTSPU protocol (RTSP over UDP) Windows Media Player version 9 needs to be given server permission in ZoneAlarm Pro. [9178]
l. Other privacy protection programs should not be used with ZoneAlarm Pro
Other applications that contain privacy protection features (for example, AdSubract) may interfere with ZoneAlarm Pro's privacy features. To avoid this, do not run other privacy applications simultaneously with ZoneAlarm Pro. [9203]
m. Mailsafe doesn't support older versions of Outlook Express.
If you want to use MailSafe with Outlook Express, make sure you are running version 5.00.2919.6700 or higher. [9219]
n. Running ZoneAlarm Pro simultaneously with PC-cillin may cause conflicts.
We recommend that you not run other PC firewall products (such as PC-cillin) simultaneously with ZoneAlarm Pro. [7906]
o. "Page cannot be displayed" error when first opening browser with Ad Blocking on High.
Users occasionally receive a "Page cannot be displayed" error the first time they open a browswer after deleting temporary Internet files with Ad blocking set to High. If this occurs, click the browser's Refresh button. [9354]
